PowerMOVE
The PowerMOVE is a passive patient lift for moving patients safely and comfortably. The mast allows a translational movement of the lifting arm. The patient is always lifted the same distance from the mast, regardless of height, and they can therefore be positioned very precisely. The PowerMOVE requiers llittle maintenance and the spread of its legs is electrically adjustable, as are the height and tilt adjustments on the arm and spreader bar. The touch&move driving support makes working with the patient lift even more effortless, easier and less stressful. This is a smart solution for tackling physical stresses and strains, reducing the risk of physical complaints.
The passive lift is designed for moving patients in combination with a passive lifting sling. The PowerMOVE has a four-point electric tilting bar with flexible spacers as standard. Suitable for use in combination with a patient sling with clips. The PowerMOVE can also be fitted with a two-point bar for patient slings with loops. The patient lift has a bag for the stiffeners as standard and is optionally available with an integrated weighing unit.
Features
- touch&move driving support
- New: Direct feedback
- Translational column lift with a fixed spreader bar
- A long arm and legs give it a large unloading base
- Low-maintenance column with spindle
- Safe working load: 200 kg
touch&move driving support
The PowerMOVE patient lift has touch&move driving support as standard. This is a unique, intuitive electrically powered drive that makes working with a patient lift easier and more pleasant. The push bar of a patient lift with touch&move driving assist has sensors that measure the magnitude and direction of the force exerted on it. A gentle push against the bar is enough to set the additional wheel under the patient lift in motion, either forwards, backwards or sideways. That may sound technical but using it is very intuitive. Read more about touch&move here.
New: the direct feedback feature on the operating panel enables you to check whether the patient lift is being used correctly. And off you go - no problem!
Spreader bar options
The PowerMOVE has a four-point electric tilting bar as standard. This four-point bar is suitable for patient slings with clips that can be fixed to the attachment points. Using the manual control or the control panel, the patient’s position can be changed during the transfer.
When patient slings with loops are to be used, the PowerMOVE can be fitted with a two-point bar. This type of spreader bar has two suspension points and no tilt feature. The patient’s position can therefore only be changed by varying the length of the loops.
Weighing unit
Regularly weighing passive patients is very difficult in practice. A patient lift with a weighing unit can help make periodic weighing of a patient simpler. The weighing unit is optional and can be integrated into the arm of the PowerMOVE. This makes it possible to weigh patients easily on a regular basis. The maximum weighing capacity is 200 kg.
PowerMOVE 3.1
|
Part |
Specifications |
||
|
touch&move |
manual |
|
|
|
Highest position lift arm |
207 |
207 |
cm |
|
Lowest position lift arm |
79 |
79 |
cm |
|
Height of the chassis |
11,5 |
11,5 |
cm |
|
Space under the chassis |
6 |
6 |
cm |
|
Reach lift arm at lowest position |
57 |
57 |
cm |
|
Reach lift arm at highest position |
61,5 |
61,5 |
cm |
|
Fulle lenght |
140,5 |
131,5 |
cm |
|
Push handle height |
120 |
117,5 |
cm |
|
Minimum total height |
188 |
188 |
cm |
|
Maximum total height |
212 |
212 |
cm |
|
Maximum width |
120 |
120 |
cm |
|
Internal width at maximum spread |
105 |
105 |
cm |
|
Minimum width |
70 |
70 |
cm |
|
Internal width at minimum spread |
60 |
60 |
cm |
|
Maximum turning radius |
155 |
148,5 |
cm |
|
Maximum weight |
200(/150*) |
200(/150*) |
kg |
|
Duration of complete lifting movement |
45 |
45 |
sec |
|
Total weight |
106 |
96 |
kg |
* Depending on the spreader bar used. Flexbar 150 kg.
